> Remove the plunger. Place the stem of the plunger in a hand drill, >holding a piece of 400 emery cloth, place the plunger in your hand , wrapped >in the cloth and reduce the size "carefully" until the plunger moves >effortless >in the yoke. Good luck. > >Bob Yes, that's a fine fix if binding is the problem. It wasn't in this case. The plunger moved fine with no binding whatsoever. When I swapped the problem one with another, it also worked fine without binding. The problem was that it clicked when it worked.
This PTG archive page provided courtesy of Moy Piano Service, LLC