The one I did, I thought the angled action bracket screws on the front side were the hardest. Plan on drilling out the old hole and dowel and pilot drill a new one. On the other ones the longer screws work. Guessing how far to turn the let off when the stack was off is a good one. I was off by 1 1/2 turns. I turned them 2 1/2 turns but they had been backed out 4 full turns. Keith Roberts ----- Original Message ----- From: "Avery Todd" <avery@ev1.net> To: <pianotech@ptg.org>; <mfarrel2@tampabay.rr.com> Sent: Tuesday, June 24, 2003 3:12 PM Subject: YC Brackets > Hi Terry, > > I was just wondering if you've done the action bracket > job yet and how it turned out. I've received what I need > from YC and will be picking up the action in the next > day or so. > > Just curious about any problems, etc. This is my first > time to do that particular job. > > Avery > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC