----- Original Message ----- From: "Delwin D Fandrich" <pianobuilders@olynet.com> To: <davidlovepianos@earthlink.net>; "Pianotech" <pianotech@ptg.org> Sent: March 01, 2003 8:32 AM Subject: Re: System Three Varnish > As I said earlier, I've not used System Three varnish. But the compatibility > issue may be a valid one. I've had one combination of epoxy/varnish give me > problems. The varnish never did thoroughly dry and had to be stripped off > and replaced. Correction: I seem to have varnish on the brain. Remove the word varnish and insert primer. This was on the lid of a Steinway Model A lid that had been trashed at a state university by students who, apparently, had nothing better to do with their time. As may be, this incompatibility thing may be real. Nowadays when I try any new combination of epoxy/finish I always test a sample first. If both materials work as expected I go ahead with the project. So far, no other combination has given trouble, but still.... Del
This PTG archive page provided courtesy of Moy Piano Service, LLC