Uh, ooohhh. I hope this isn't a grey market Yamaha! I really think Yamaha's policy of not supporting grey market pianos is BS. Terry Farrell ----- Original Message ----- From: "Kevin E. Ramsey" <kevin.e.ramsey@cox.net> To: "Pianotech" <pianotech@ptg.org> Sent: Sunday, March 02, 2003 9:42 AM Subject: Re: Yamaha G-2 sustain pedal squeek Tim, I'd call Yamaha at (800) 854-1569 and order a set of pedal dowels, part number T5901316. Have the serial number of the piano in front of you before you call. Clean the rod, perhaps buffing it a little on a wheel, and re-assemble. That should do it. Kevin ----- Original Message ----- From: Tuner1956@aol.com To: pianotech@ptg.org Sent: Sunday, March 02, 2003 7:01 AM Subject: Yamaha G-2 sustain pedal squeek Hello list: I have a customer that complains about a squeak in her sustain pedal. I have eliminated it but comes back in a couple of weeks. Seems to be the pedal rod at the top of the hole around the bushing. Any suggestion would be appreciated. Tim PTG Associate
This PTG archive page provided courtesy of Moy Piano Service, LLC