This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Tuner1956@aol.com Sent: Sunday, March 02, 2003 9:01 AM To: pianotech@ptg.org Subject: Yamaha G-2 sustain pedal squeek Hello list: I have a customer that complains about a squeak in her sustain pedal. I have eliminated it but comes back in a couple of weeks. Seems to be the pedal rod at the top of the hole around the bushing. Any suggestion would be appreciated. Tim PTG Associate Dude, Ya gotta elaborate a little here. What vintage? How did you eliminate the first time? Work with us here! Kidding aside, polish rods, rebush, replace leather and cloth punchings as necessary, Lube those coil springs on the levers, VJ lube, Protek. There is no one answer for such a generalized description, but there is ONE answer for YOUR squeak. Isolate, diagnose, and the solution will be obvious. Good luck Tom Driscoll RPT ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/4e/da/48/e5/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC