Eeeeeeeesh. Have you ever tried that? Terry Farrell ----- Original Message ----- From: "J Patrick Draine" <draine@attbi.com> To: "Pianotech" <pianotech@ptg.org> Sent: Sunday, March 02, 2003 1:56 PM Subject: Re: Humble request: What to swab loose pin holes with? > > On Sunday, March 2, 2003, at 01:10 PM, gordon stelter wrote: > > > I have a relative "newbie" tech friend who has gotten > > himself in a bit of a corner: Blasius upright, had > > loose pins of various sizes. Plate is out and he > > needs to stay in customer's pre-arranged budget on > > this piano. Is looking for most economical, likely fix > > for pins. (No block replacement or plugging.) > > Rather than swabbing has he considered filling the pin holes with low > viscosity epoxy, then redrilling? > > Patrick Draine > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC