On Sunday, March 2, 2003, at 01:10 PM, gordon stelter wrote: > I have a relative "newbie" tech friend who has gotten > himself in a bit of a corner: Blasius upright, had > loose pins of various sizes. Plate is out and he > needs to stay in customer's pre-arranged budget on > this piano. Is looking for most economical, likely fix > for pins. (No block replacement or plugging.) Rather than swabbing has he considered filling the pin holes with low viscosity epoxy, then redrilling? Patrick Draine
This PTG archive page provided courtesy of Moy Piano Service, LLC