Hi Gordon, That seems like an awful lot of work, for a patch-up job. Since you would be replacing the strings anyway, and with the plate off, wouldn't it be just as easy to replace the pinblock. It seems to me that the difference in labour time, between what you are suggesting, and replacing the block is not that much different. The end result, with the new block, is a much better long term result for your customer. Regards, John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message ----- From: "gordon stelter" <lclgcnp@yahoo.com> To: "Pianotech" <pianotech@ptg.org> Sent: Monday, March 03, 2003 11:05 AM Subject: A new, perhaps very effective way to treat old blocks. Votes requested. > Nope, but perhaps it "came to me in a dream!" > Why not, after removing the plate, clean the holes > thoroughly with a gun tool (metal), and then REINSERT > the old pins after slobbering some epoxy around the > holes? Then remove pins, install plate and string with > one size up? > OR: Clean holes, replace old pins, CA thoroughly > (really soak 'em ! ) remove, install plate and string > with one size up? > Which do you think would work better? > I'm really curious about this one. > Respectfully, > Gordon > > > > > __________________________________________________ > Do you Yahoo!? > Yahoo! Tax Center - forms, calculators, tips, more > http://taxes.yahoo.com/ > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC