Just the cheap hardware store brand that looks fresh. The 6 min stuff. The test I witnessed, the guy filed a relief vent in the side of the hole with a triangular file. Swabbed the hole good and drove in the old pin. Made for a tight/jumpy pin. I didn't like the feel. Maybe removal of the pin and cleaning/ sanding/wirebrushing after the epoxy cured would help. It would be possible to tune with a pin like that but not much fun. Keith Roberts ----- Original Message ----- From: "gordon stelter" <lclgcnp@yahoo.com> To: "Pianotech" <pianotech@ptg.org> Sent: Sunday, March 02, 2003 10:10 AM Subject: Humble request: What to swab loose pin holes with? > I have a relative "newbie" tech friend who has gotten > himself in a bit of a corner: Blasius upright, had > loose pins of various sizes. Plate is out and he > needs to stay in customer's pre-arranged budget on > this piano. Is looking for most economical, likely fix > for pins. (No block replacement or plugging.) > Is thinking of swabbing with epoxy, reppinning with > biggest "Lo-Torque". I already warned about recent > complaints regarding Diamond products. > Question: Which epoxy swabbing method/brand is > recommended? I have never done this, so I can't advise > him, but thought that an epoxy swab followed by CA on > individual still loose pins after stringing might > work. What think ye? > \ Respectfully, > Thump > > __________________________________________________ > Do you Yahoo!? > Yahoo! Tax Center - forms, calculators, tips, more > http://taxes.yahoo.com/ > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC