Steinway uprights

Robin Olson DCrpt@comcast.net
Mon, 03 Mar 2003 21:26:51 -0500


     Probably something to do with bearing is the cause for S'Way 
Uprights to be difficult to tune.Some of the "noise" comes from the 
area above the V bar and below the pressure bar.Put your finger on 
that section and you will hear less whine.I believe when the case is 
back together and you stand back abit alot of the noises are 
gone.Another thing that makes them hard to tune is balanceing the 
tension between the various segments of the string.Especially the area 
between the the tuning pin and pressure bar.It helps makes the tuning 
stable eventually,but you have to get it there.I find useing more 
upward pulls to pitch and as little as possible lowering to pitch 
works well.String stretching also helps to equalise the tension.Be 
ready to make some big pitch changes after doing the stretching.
    I have many S'way uprights that I tune,and I like them OK.They get 
better with time.Usually settle down pretty nicely in about two or 
three years.Then they are a real pleasure to tune because they are so 
stable.It is worth all the initial struggle to get them there.  
                                                        Robin Olson  



----- Original Message -----
From: David Love <davidlovepianos@earthlink.net>
Date: Monday, March 3, 2003 8:33 pm
Subject: Steinway uprights

> <span><p><HEAD>
> <META http-equiv=Content-Type content="text/html; charset=windows-
> 1251"><META content="MSHTML 6.00.2715.400" name=GENERATOR></HEAD>
> <span><p>
> <P><FONT face="MS Sans Serif" size=2>
> <DIV>The nasty, dirty, false beating, wiry, whiny, twangy, weak 
> sound frequently found in S&amp;S uprights in the 5th octave and 
> above is primarily due to:</DIV>
> <DIV> </DIV>
> <DIV>A.  poorly shaped bearing bar</DIV>
> <DIV>B.  sloppy notching</DIV>
> <DIV>C.  inadequate bearing</DIV>
> <DIV>D.  inadequate counterbearing pressure</DIV>
> <DIV>E.  all of the above</DIV>
> <DIV>F.  other (please extrapolate)</DIV>
> <DIV> </DIV>
> <DIV>The best way to address this problem short of complete 
> rebuilding is ________________.  (please feel free to improvise 
> your ideas).</DIV>
> <DIV> </DIV>
> <DIV> </DIV>
> <DIV>David Love</DIV>
> <DIV>davidlovepianos@earthlink.net</DIV>
> <DIV> </DIV></FONT>
> <P></P></span></span>
> 
> 
> 


This PTG archive page provided courtesy of Moy Piano Service, LLC