>Ron. What is your screwing pattern? (Bridge-gluing-wise!) Do you run one >through ever rib into the bridge and one between each set of ribs and >that's it? After dry, remove screws from rib/bridge and dowel. Leave >screws and buttons between ribs? And that's all there is to it? Thanks. > >Terry Farrell Nothing through any of the ribs, just one screw with a button half way between adjacent ribs. Screws and buttons stay, no dowels. I build ribs to support the soundboard. Why would I want to go drilling holes in them? Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC