Screws in aluminum rail

[John Ross]

Hi Jose,
I can't remember having any particular problem, with the aluminum rails.
When putting the screws back in, I always turn the screw backwards, till it
drops into place, then tighten as normal.
Regards,
John M. Ross
Windsor, Nova Scotia, Canada
jrpaino@win.eastlink.ca
----- Original Message -----
From: "Jose Jodar Garcia" <pianos_jodar@hotmail.com>
To: <pianotech@ptg.org>
Sent: Monday, March 17, 2003 12:57 PM
Subject: Screws in aluminum rail


Dear colleagues:
All of you know the problems we usually have to put the screws intro the
aluminium rails.
Any tip or suggestion?
Would be very apreciated
Regards