At 17:57 3/17/2003 +0100, you wrote: >Dear colleagues: >All of you know the problems we usually have to put the screws intro the >aluminium rails. >Any tip or suggestion? >Would be very apreciated >Regards Jose, As with any screw (machine/wood/sheet metal), get the tip entering the hole then, while putting gentle pressure on the screw, slowly turn the screw in the OUT direction until you feel the screw drop into the groove. Then screw in. This is a way of feeling for the established groove and avoiding "cross-threading" (making a new thread) If the screw doesn't go in easily, you probably aren't "in the groove"... 2¢ Conrad Hoffsommer - Music Technician Luther College, 700 College Dr., Decorah, Iowa 52101-1045 Vox-(563)-387-1204 // Fax (563)-387-1076 - People never grow up, they just learn how to act in public. -Bryan White
This PTG archive page provided courtesy of Moy Piano Service, LLC