This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi Paul, The shaft thread is a 1/8 pipe thread that is tapered and the tip end = fits a 20 year old tip. Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Paul Chick (EarthLink)=20 To: Pianotech=20 Sent: Monday, March 17, 2003 10:38 AM Subject: Re: heads up ----- Original Message -----=20 From: Joe And Penny Goss=20 To: pianotech@ptg.org ; caut@ptg.org=20 Sent: Monday, March 17, 2003 10:49 AM Subject: heads up Hi, If there are any interested I have quite a few tuning lever heads = that fit the ( OLD ) Hale tuning hammer. These can be drilled to any = degree you order. Joe Goss imatunr@srvinet.com www.mothergoosetools.com Joe Are these threaded or the old tapered fit? Paul C ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/27/f1/72/24/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC