---------------------- multipart/mixed attachment --=====================_29809765==.ALT Do I understand that you will drill and tap the head yourself or it is already done? If you are tapping the hole you drill can you also re thread the shaft? Greg Newell At 11:49 AM 3/17/2003, you wrote: >Hi, >If there are any interested I have quite a few tuning lever heads that fit >the ( OLD ) Hale tuning hammer. These can be drilled to any degree you order. >Joe Goss ><mailto:imatunr@srvinet.com>imatunr@srvinet.com >www.mothergoosetools.com > >--- > >Checked by AVG anti-virus system (http://www.grisoft.com). >Version: 6.0.462 / Virus Database: 261 - Release Date: 3/13/2003 Greg Newell mailto:gnewell@ameritech.net --=====================_29809765==.ALT An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/39/53/5a/36/attachment.htm --=====================_29809765==.ALT-- ---------------------- multipart/mixed attachment --- Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.462 / Virus Database: 261 - Release Date: 3/13/2003 ---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC