This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Yes but we need to have sample of the thread to be sure the fit is = exact. Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Greg Newell=20 To: Pianotech=20 Sent: Monday, March 17, 2003 2:26 PM Subject: Re: heads up Do I understand that you will drill and tap the head yourself or it is = already done? If you are tapping the hole you drill can you also re = thread the shaft? Greg Newell At 11:49 AM 3/17/2003, you wrote: Hi, If there are any interested I have quite a few tuning lever heads = that fit the ( OLD ) Hale tuning hammer. These can be drilled to any = degree you order. Joe Goss imatunr@srvinet.com www.mothergoosetools.com --- Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.462 / Virus Database: 261 - Release Date: 3/13/2003 Greg Newell mailto:gnewell@ameritech.net=20 -------------------------------------------------------------------------= ----- --- Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.462 / Virus Database: 261 - Release Date: 3/13/2003 -------------------------------------------------------------------------= ----- _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/1a/bb/11/c6/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC