Jonathan Finger wrote: > Richard, thanks for the clarification. > I think it would be interesting to measure the difference in force > between the two. I would think that possibly the balance lever would > absorb some of this force in it's effort to support the weight of the > hammer. I can't really think of a "direct line" as this would prevent > the hammer from letting off. But I see what you mean. > > Any ideas on a way to measure the difference scientifically? > Setting up a measurement is easy enough, its setting it up correctly so as to issolate what one is looking for that presents the challange. One also needs to know what signature the looked for signal has so as to be able to properly idendify it. There has been some research done but most of this pertains to the question of whether a piansts varying touch can influence tone. I have yet to be able to find an experiement that set itself to the task of identifying through measurement if the impact can be felt at the key. There are also a few more impirical methods to attempt, but again for these to have any meaning one simply needs to set things up thoroughly. For example the testing to see whether a ear muffed person can identify hardness or not by feel alone. I have done some informal testing and measuring, and both point towards there being something delivered to the end of the key by the hammer impact. But since I know the degree of control I have on such experiment is far from sufficient to draw any conclusions on,... I dont. I do want to pursue the matter tho. Its really quite interesting when it comes down to it. RicB -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html
This PTG archive page provided courtesy of Moy Piano Service, LLC