Hazen, It is probably possible. BUT, you need to: 1. add hitch pins 2.Run a scale evaluation to make sure it will work. Indiscriminate altering of scales, w/o some kind of program or scaler to check it out, is not the way to go. I've seen too much of this postulating from the olde techs of yore. Makes me wanna scream, sometimes. Of course their intent was pure, but they didn't have a clue. If the piano is worth working on, it is worth doing right, as in possibly improving, etc. Just my 2cents. <G> Best Regards, Joe Garrett, RPT, (Oregon) Been There, Didn't Like It, So I'm Here To Stay! [G}
This PTG archive page provided courtesy of Moy Piano Service, LLC