I understand the need to add hitch pins. I had a piano rescaled professionally by one of the top techs providing this service recently, but it would have required about 15 new hitch pins. And I was under a lot of time pressure from the customer, so I just strung it as original. This piano was also very lighthly ribbeed, so I wondered if heavier guages would be sensible. But what do you mean by "run a scale evalutaion to make sure it will work".? Please. Thump --- Joseph Garrett <joegarrett@earthlink.net> wrote: > Hazen, > It is probably possible. BUT, you need to: 1. add > hitch pins 2.Run a scale > evaluation to make sure it will work. > Indiscriminate altering of scales, w/o some kind of > program or scaler to > check it out, is not the way to go. I've seen too > much of this postulating > from the olde techs of yore. Makes me wanna scream, > sometimes. Of course > their intent was pure, but they didn't have a clue. > If the piano is worth working on, it is worth doing > right, as in possibly > improving, etc. Just my 2cents. <G> > Best Regards, > Joe Garrett, RPT, (Oregon) > > Been There, Didn't Like It, So I'm Here To Stay! [G} > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives __________________________________________________ Do you Yahoo!? Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop! http://platinum.yahoo.com
This PTG archive page provided courtesy of Moy Piano Service, LLC