---------------------- multipart/alternative attachment In a message dated 3/29/03 4:04:37 AM !!!First Boot!!!, kpiano@goldrush.com writes: > What part of the hitch pin are you guys measuring to? > The inside of the loop or the center line? I'm starting to think that > since the hitch pin is tilted and therefore oval to the string, eyeballing > the loop is the better way. > I have made the pattern on a piece of packaging paper, rubbing with the > flat side of a carpenters pencil, but that only shows the tip of the pin. I > guess that is what the measurements fill in that the pattern doesn't show. > Keith Roberts > > If you're going to send in the paper pattern, the string maker will know what to do. Not to be a smart alleck, but your pattern won't be the first one they've seen. :) Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/19/7c/12/5f/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC