If this let off rail has the round eye-type screws, you might be able to use a little tool that Schaff sells - either #78 on page 40 or #144 on page 39 - if there is a half-inch or so to fit them in there. Terry Farrell ----- Original Message ----- From: <Tvak@aol.com> To: <pianotech@ptg.org> Sent: Saturday, March 29, 2003 9:18 AM Subject: Re: strange action configuration in Sejung > > In a message dated 3/29/03 3:17:40 AM, dnereson@dim.com writes: > > ><<What were they thinking: that the let-off would be set for life?>> > > I'm guessing here, but is it possible that the entire rail can be adjusted, > changing the letoff point for the entire piano by raising or lowering the > rail? Could there be adjustment screws on each end of the rail which would > allow this? > > It's not something I've ever seen, but could they be so clueless as to make > it impossible to change the letoff? > > Tom S > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC