This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi Gang, As some recall the 170 Chapter (South Central Pa) has a Chapter project where they took 8 different manufacturers of pinblock and drilled each with 10 different sizes of drill and pinned them. The torque readings were taken in June 1996, Sept 1999 and today. The data is available in a MS Excel file. If you want it you must reply to MY PERSONAL E-MAIL ADDRESS BELOW. Replying to the list won't cut it, I'll be working the MARC Convention and will not have time to monitor this list. I'll try to paste the data here for those that do not have Excel or something that will open an Excel file.I sent this to myself first and it looks fine. Mike Mike McCoy RPT Chapters 170 & 190 PTG Langhorne, Pa mailto:mjmccoyrpt@earthlink.net <<----------- RESPOND HERE Drill size Letter Fraction Metric #1 - Sohmer 5 ply Maple #1 - Sohmer 5 ply Maple #1 - Sohmer 5 ply Maple #2 - APSCO Delignit #2 - APSCO Delignit #2 - APSCO Delignit #3 - Baldwin 49 ply #3 - Baldwin 49 ply #3 - Baldwin 49 ply #4 - Bolduc 5 ply #4 - Bolduc 5 ply #4 - Bolduc 5 ply June Sept Mar June Sept Mar June Sept Mar June Sept Mar 1996 1999 2003 1996 1999 2003 1996 1999 2003 1996 1999 2003 0.25 1/4 6.35 210 185 190 275 255 225 180 145 145 230 190 160 0.252 6.4 210 180 190 243 225 205 190 145 130 230 200 180 0.2559 6.5 205 175 190 280 250 225 190 150 140 200 165 149 0.2571 F 6.53 180 170 170 280 250 220 203 160 145 220 185 170 0.2598 6.6 175 160 150 280 245 220 175 145 125 215 185 165 0.261 G 6.63 160 150 160 280 225 210 200 155 135 190 155 140 0.2638 6.7 150 125 150 275 230 200 180 145 120 160 115 115 0.2657 17/64 6.75 148 130 160 265 225 198 180 150 135 160 150 150 0.2677 6.8 148 130 125 250 200 185 150 140 120 160 145 145 0.2717 I 6.9 140 120 100 220 185 175 140 110 95 110 95 90 #5 - Schaff Delignit #5 - Schaff Delignit #5 - Schaff Delignit #6 - ???? 14 PPI Beech #6 - ???? 14 PPI Beech #6 - ???? 14 PPI Beech #7 - Falconwood 20.5 PPI #7 - Falconwood 20.5 PPI #7 - Falconwood 20.5 PPI #8 - Schaff 11 ply #8 - Schaff 11 ply #8 - Schaff 11 ply June Sept Mar June Sept Mar June Sept Mar June Sept Mar 1996 1999 2003 1996 1999 2003 1996 1999 2003 1996 1999 2003 230 190 165 150 125 110 380 340 300 210 185 152 230 200 170 145 125 110 360 325 285 210 180 152 225 185 165 145 120 105 380 320 275 205 175 150 225 185 165 145 125 105 360 310 265 180 170 150 215 175 155 140 120 103 350 300 265 175 160 145 200 150 140 130 120 103 275 235 230 160 150 130 205 160 150 110 90 80 380 325 280 150 125 110 200 160 150 105 95 90 380 330 285 148 130 108 175 160 148 80 75 75 350 315 275 148 130 108 150 135 120 75 65 65 305 250 275 140 120 105 Varnish hole VS Dry Drill size Letter Fraction Metric #8 - Schaff 11 ply #8 - Schaff 11 ply Sept Mar 1999 2003 0.2559 6.5 125 120 Pinned Dry 0.2559 6.5 145 140 Swabbed w/Varnish 0.2717 I 6.9 125 100 Pinned dry 0.2717 I 6.9 100 115 Swabbed w/Varnish Mike McCoy RPT Chapters 170 & 190 PTG Langhorne, Pa mailto:mjmccoyrpt@earthlink.net ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/07/5e/6d/4b/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC