Barcus-Berry Piano Pick-up

[Don]

Hi Bill,

You are correct that the pzm radio shack mic was at one time made by crown.
This is no longer the case and the replacement mic in the radio shack line
is quite frankly garbage.

At 10:10 AM 5/19/2003 -0400, you wrote:
>Is this the thread about the pickup for the church piano?
>I don't remember if this was a grand or vertical piano.  If it is a 
>vertical piano the most inexpensive way to go (and it might work just 
>fine for the application) is get a PZM mic (Radio Shack still makes one 
>I believe) and tape it to the front of the inside of the lid so that it 
>faces down to the action. Or on the inside of the knee board facing the 
>bridge (unless the trap assembly is too noisy.  You can do an internet 
>search on PZM mike (pressure zone mic) and find sources for them $ 
>25-$200 even though the Radio Shack ones I have (I believe they were 
>make by Crown) work fine.
>Let me know if you understand this or if I can help.
>Bill
>
>
>
>
>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives
>
>

Regards,
Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T.

mailto:pianotuna@accesscomm.ca
http://us.geocities.com/drpt1948/

3004 Grant Rd.
REGINA, SK
S4S 5G7
306-352-3620 or 1-888-29t-uner