ok... so I'm an absolutely horrid artist, but how's this for making bass/tenor strings longer and being able to put plain wire trichords lower in a spinet? basically, the bass would be at a fairly acute angle, with the bridge running almost vertical, instead of diagonal, and there would be a separate upper bass bridge with several plain-wire trichords. The tenor strings, would be greatly fanned out in the first octave or two. Or... does anyone have any better ideas for that size piano? Ok.. I know spinets normally aren't 68 inches wide, but I figured if I made a spinet as wide as some older uprights are (that had the extra wide keyblocks at each end) I would have a little more room. -- Stephen Airy stephenairy@fastmail.fm [Drawing at:] https://www.moypiano.com/ptg/files/attachments/5d/3a/df/69/ spinetsketch1.jpg [Alternate URL:] http://tinyurl.com/cw27
This PTG archive page provided courtesy of Moy Piano Service, LLC