This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hey guys, Have a problem. I have three broken pedals off of two uprights. One is = a Grinnell console built in the mid-40's with two pedals. Both have = been broken about 1'' behind the horn. The length of the pedals are 8 = 1/2" with 5 1/8" from horn to center of pin. The other is an old = upright, the right pedal broken just behind the horn. Dimensions; 9 = 1/2" long; 5 9/16" from horn to center of pin. All three pedals have = been brazed or welded. What's the chance that they can be repaired and = how difficult is it to weld/braze them? What about replacing with new = pedals? None in Schaff fit the dimensions of either size pedal. Any ideas? Joy! Elwood Elwood Doss, Jr. RPT Piano Technician/Technical Director 106 Fine Arts Building University of Tennessee at Martin ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/b1/ed/17/9a/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC