Making a soundboard-S&S L board

[Crashvalve@aol.com]

---------------------- multipart/alternative attachment

In a message dated 11/12/03 10:16:35 PM, Erwinspiano@aol.com writes:


> after doing a mock up pre-stressing check of the bearing it had roughly 2=20
> degrees of bearing in the top 2 sections tapering down to 1&1/2 degrees in=
 the=20
> tenor starting in at the treble tenor break=A0The bass was set almost to z=
ero.=20
> It was really fairly text book S&S bearing set up.
>=20

I'm very curious to know how you mock-up a stress on the board. Do you use=20
weights? I'm guessing you have the plate in to do this ?
Glenn C.

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/ac/fb/56/01/attachment.htm

---------------------- multipart/alternative attachment--