---------------------- multipart/alternative attachment In a message dated 11/15/2003 8:09:17 AM Central Standard Time, Crashvalve@aol.com writes: > BTW, what system do you use for nicle plating ? > I started with a Caswell but quickly out grew that idea. I developed my own equipment and also bought some equipment from a retiring area rebuilder who also did his own plating. Except for the chemicals, which mostly come from Caswell, I got much of the equipment from Ebay. It is really just a matter of understanding the process and putting the various pieces together. Oh, and don't forget the painful and expensive learning curve. Do you have a recommended supplier for the milling machine? Andrew Remillard ANRPiano.com ANR Piano Service 2417 Maple Ave Downers Grove, IL 60515 630-852-5058 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/e0/aa/9d/56/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC