I'm with Conrad on this one Do it in the shop, you can align the felts just fine there, and whatever small adjustments you will need to make sideways are quickly done with a damper wire regulating tool. Besides... you will have to break that out anyways... never seen a damper felt replacement yet that didnt require a good deal of wire bending to get them all pulling out even with the pedal and all at half blow. JMV RicB Conrad Hoffsommer wrote: > > > Terry, > > If the action is in your shop _NOW_, why are you going to do the dampers > in the home??? > > Am I missing something, here? > I would think that you should glue the dampers on the heads _now_ and > all(?) you have to do in the home is regulate. > > -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html http://www.hf.uib.no/grieg/personer/cv_RB.html
This PTG archive page provided courtesy of Moy Piano Service, LLC