This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Are you sure that they don't match the shape of the originals before they disintegrated? If the originals were made out of white metal or pot metal as it's sometimes known then they may have deformed to the point where they bear little resemblance to the replacements. I installed two sets of these in the past - one on a Fischer and the other on a Marshall & Wendell (both from the Aeolian factory) and had no problems with either set. - Mark -----Original Message----- From: Life4opera@aol.com [mailto:Life4opera@aol.com] Sent: Monday, November 24, 2003 7:14 PM To: pianotech@ptg.org Subject: action brackets needed Hello all, I need some help, I recently got a marshall & wendell 1928, when I removed the action, I noticed the brackets were broke, and cracked , yes all of them, by the pictures in the schaff catalog I order the aeolian american 108 model, ( the original brackets have the number 108 engraved). then ding dong! ups came with the brackets and voila, no match at all!!! this ones are shorter, the holes not match, the angles for the rails are all wrong etc etc anyone has any idea where I can find this brackets? thanks Eduardo Ch ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/9d/8a/77/9a/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC