This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment YIKES! I'll just block out the next two weeks, read through all that, = and then tweak my planer! Seriously though, thanks, looks like tons of very good info there. Terry Farrell ----- Original Message -----=20 From: "Ron Nossaman" <RNossaman@cox.net> To: "Pianotech" <pianotech@ptg.org> Sent: Thursday, October 02, 2003 11:38 AM Subject: Re: Electric Planer Blade Alignment >=20 > >I have a DeWald 12-1/2-inch electric planer. I'm having trouble = getting=20 > >perfect (or nearly enough) blade alignment. The machine comes with = these=20 > >two little plastic/magnetic jiggydoos that are supposed to allow for=20 > >proper alignment - and they come pretty close if you are real careful = with=20 > >them. But even after doing the best job I can with these, one side of = the=20 > >blades will cut a tiny bit off a board when the other side doesn't = touch=20 > >the board. Anyone found a jig/method that provides better alignment? > > > >Terry Farrell >=20 >=20 > Terry, > Check this out. >=20 > http://www.oldwwmachines.com/Parks/FWW/tuning.asp >=20 >=20 > Ron N >=20 > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives > ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/e7/fa/5e/a0/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC