This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Clamps. Correct. That is why I said "clamping, drilling, bonding, = bolting and cleanup". I twisted a few big C clamps doing this repair the = first time. Since then I have used pipe clamps - they seem to work much = better - quite a bit more clamping power. Terry Farrell ----- Original Message -----=20 From: "gordon stelter" <lclgcnp@yahoo.com> To: "Pianotech" <pianotech@ptg.org> Sent: Thursday, October 02, 2003 11:13 PM Subject: Re: Pinblock Separation Questions > Use a pile of big C clamps. The through bolts alone > may not be enough to draw it together. > Thump >=20 > > > only the pinblock has moved, so I suppose it would > > be just fine to epoxy and=20 > > > through-bolt to the back of this design. Anyone > > aware of any pitfalls I might=20 > > > not be seeing here? > > > =20 >=20 >=20 > __________________________________ > Do you Yahoo!? > The New Yahoo! Shopping - with improved product search > http://shopping.yahoo.com > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives > ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/e7/83/b3/92/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC