This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment I could be all wet on this, but even though the Verituner does measure = pitch of a whole bunch of partials, I believe the spinner motion is = based on the pitch of one selectable partial. Maybe that's a question = for Mr. Carpenter. Terry Farrell ----- Original Message -----=20 From: <cswearingen@daigger.com> To: "Pianotech" <pianotech@ptg.org> Sent: Monday, October 13, 2003 4:01 PM Subject: Re: Pitch Raise, was: Standard Pitch/Verituner > Michael, >=20 > Take a look at www.verituneinc.com to see more about this ETD. You = think > its difficult to stop the lights when you are measuring a single = partial - > try throwing in all the other partials and see if you can stop the = spinner. > It's much more challenging! ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/dc/d0/bb/8c/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC