---------------------- multipart/mixed attachment >I forget where I learned it, but the fender washers on allthread trick >seems to work pretty good for me. Relatively consistent, easy to lift the >keys, etc., etc. Using 3/8 allthread, with washers that have a 5/8 hole, >the "travel" is enough to lift a key without removing the weight. Placed >between the capstan and the backcheck. About 4 washers per note. Haven't >weighed 'em, don't care. Not cheap, though, nowadays. The dern washers add >up when you get enough to make a 20" section! > >Later, >Guy That one's from Kimball. I still use mine too, much more often than the individual weights. I made it full width, about 20 years ago when the washers were cheaper. Most times, it's well within good enough. Ron N ---------------------- multipart/mixed attachment --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.525 / Virus Database: 322 - Release Date: 10/9/2003 ---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC