---------------------- multipart/alternative attachment In a message dated 10/25/2003 6:35:11 PM Pacific Standard Time, Crashvalve@aol.com writes: In a message dated 10/25/03 7:29:41 PM, Erwinspiano@aol.com writes: I use a crow bar or whatever I can get in along under the belly rail to pry it out. Some boards practically fall out, others just don't want to leave home. I posted info on a firestone air actuator for SB removal earlier but this belly rail comment reminded me that the last board I "air-popped" out (and really I am not a bigtime piano a month guy), anyway the last grand was a six-foot lester with a severe overhang in the belly rail, but the actuator hose slipped right in the inch and one quarter or so space after I slimmed down the end plate/bolt closure. Little or no problem, the next board I do I intend to put actuators all around. Added bonus is they store flat in a drawer (as a smalltime piano guy I have a tiny shop also). Glenn Great idea Glenn. Where do I get mine & cost? Dale ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d4/d1/87/05/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC