---------------------- multipart/alternative attachment In a message dated 10/26/03 12:27:52 PM, pianobuilders@olynet.com writes: >=20 > read all about them. In larger sizes they are also used in the occasional=20 > rim press. As in ours. >=20 > =A0 >=20 > Del >=20 >=20 Our actuators are hose-shaped not cylindrical, and some of the OEM stuff we=20 get is built as a one-off for one of the big three auto manuf. and not=20 available elsewhere, so it can be branded firestone but not listed. I'm sure= other=20 companies make hose-type for general sale. It probably works best to have la= rge=20 surface area in contact with the board. BTW I had the hardest time convincin= g=20 Ingersoll-Rand that I had an air impact of theirs with an odd-sized nose,=20 turns out it too was made for GM only. Had to scrounge for nose adapters. De= l,=20 have you built your occasional rim press for veneering ? or full-fledged rim= =20 replacement ?=20 Glenn C. ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/7f/a5/32/d7/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC