Make a soundboard--Measurements

Crashvalve@aol.com Crashvalve@aol.com
Sun, 26 Oct 2003 10:37:01 EST


---------------------- multipart/alternative attachment

In a message dated 10/26/03 9:57:13 AM, Erwinspiano@aol.com writes:


>=20
>=20
> Little or no problem, the next board I do I intend to put actuators all=20
> around. Added bonus is they store flat in a drawer (as a smalltime piano g=
uy I=20
> have a tiny shop also).
> Glenn
>=20
>=20
>  Great idea Glenn. Where do I get mine & cost?
>=20
>  =A0=A0 Dale
>=20
>=20

Right away I really apoligize to all and sundry on the list. Many of my cool=
=20
shop toys are built from components that would cost lots but I get at=20
industrial auction. I realize this is scant help for everyone, but   you mig=
ht make a=20
good expedient, See my other post.
My cost was about five dollars, but I had to buy a skid lot to get these=20
jewels.
Glenn C.

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/52/3c/22/64/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC