What's the best way to make a shaped caul? David Love davidlovepianos@earthlink.net > [Original Message] > From: Ron Nossaman <RNossaman@cox.net> > To: <davidlovepianos@earthlink.net>; Pianotech <pianotech@ptg.org> > Date: 10/31/2003 8:06:47 AM > Subject: Re: Make a soundboard--Measurements > > > >So just how important is it for function, noise, whatever else, that the > >ribs fit precisely and snugly in the notch in the rim. I see all kinds of > >variation on pianos of high quality. > > Opinions vary, but mine is that the rim mortise be at least as wide as (or > wider than) and at least as deep as (or deeper than) the rib end. I > consider a perfect fit to be of little to no importance either structurally > or tonally. > > > >Dale (and others): I would be curious to hear your rib crowning procedure > >when you can. > > > >David Love > > Horizontally laminated with shaped cauls. > > Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC