Hi Julia, You can't bake a cake without a pan. Get a gauge--get the best one you can afford. There is a swing test as well. There are two ways to count the swings. 7 full cycles or 13 back and forth. Good luck. At 06:38 PM 17/12/2004 EST, you wrote: >In a message dated 12/17/2004 6:19:09 PM Eastern Standard Time, >Richard.Brekne@grieg.uib.no writes: > > > Check the jack center pins to 3-4 grams of friction and for firmness > > > Do I need a guage to do this? If so what kind of gage? Are there other >ways to check for this specified amount without a gage/device? Thanks for >the information and help. > > Julia, > Reading, PA Regards, Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T. Non calor sed umor est qui nobis incommodat mailto:pianotuna@accesscomm.ca http://us.geocities.com/drpt1948/ 3004 Grant Rd. REGINA, SK, S4S 5G7 306-352-3620 or 1-888-29t-uner
This PTG archive page provided courtesy of Moy Piano Service, LLC