Patrick
The problem that you will run in to is that the CA glue will
harden much more than the hardness of the wood and it will be difficult to
sand level. If you try and refinish it there will be a different sheen. I
would just use carpenters glue and hold the veneer down with masking
tape. Multiple layers makes really strong clamp.
Chris Gregg
At 07:43 AM 12/28/2004, you wrote:
>Yes, in the vertical plane. I don't have the proper clamps for such a job
>so I'll probably go with the CA glue (medium viscosity or thick?).
>Thanks for the feedback,
>Patrick
>On Dec 28, 2004, at 7:03 AM, James Grebe wrote:
>
>>Is this veneer of the arms? That is a common place for Steinway veneers
>>to come loose and crack.
>>Jim
>>James Grebe
>
>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives
http://www.tuneit.ca
This PTG archive page provided courtesy of Moy Piano Service, LLC