3/8 inch hex shaft for Hale Hammer?

[Joe And Penny Goss]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Hi Dave,
Don't have one but could make one.
Joe Goss RPT
Mother Goose Tools
imatunr@srvinet.com
www.mothergoosetools.com
  ----- Original Message -----=20
  From: Piannaman@aol.com=20
  To: pianotech@ptg.org=20
  Sent: Wednesday, December 29, 2004 9:27 PM
  Subject: 3/8 inch hex shaft for Hale Hammer?


  Hi all,=20

  I'm still trying to resurrect my old Hale, which deserted me after =
many good years...;-(.  All of the newer hex shafts are 7/16".  Mine was =
3/8", very close to a centimeter in diameter.  Schaff has none in the =
old APSCO collection or in their more current stash.  Do any of you fine =
folks have ANYTHING that resembles this?  I swear, it says Hale on it, =
even through a magnifying glass.=20

  Thanks to all,=20

  Dave Stahl 
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/b6/55/6a/fe/attachment.htm

---------------------- multipart/alternative attachment--