---------------------- multipart/alternative attachment They have a pitch raise function. Check the manual. It involves holding the measure button and rolling it over on one of the function keys for either a 25% or 30% raise. Take measurements periodically as you ascend the scale. Keep in mind that the bass usually requires a 20% overpull (unisons as you go), the midrange 30%, and the upper end 35% so you will have to modify the target slightly to get a more accurate finish. David Love davidlovepianos@earthlink.net ----- Original Message ----- From: To: pianotech@ptg.org Sent: 2/3/2004 8:35:02 AM Subject: Pitch Raise Hello, Does anyone care to share an efficient way to perform a pitch raise using a SAT3? Thanks! Jon ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/65/76/9d/49/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC