This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hello List and Mark K In your post you said (inter alia): "The purpose of the 'downbearing' in = bowed string instruments is to hold the bridge in place, hold the = strings in place, and to ensure that the bridge thoroughly defines one = end of the vibrating string. Perhaps this is also=20 the case in pianos." Or perhaps not. The strings are kept firmly in = place not so much as by the downbearing as by the bridge pins. In the = stringed instrument there is also a "rib" - the "bass bar". This goes = with the grain of the belly and is there to stop the collapse of the = belly. It is assisted by the "sound post" which is, like the bridge, = only held in place by friction and transmits the sound waves to the back = of the instrument. In the piano we only have one sound board. Some = pianos even have "wolf notes".... (the so called "killer 8ve.") This gets us nicely away from those Automotive Analogies - or AA :-) Somebody ought to invent the equivalent of "string adjusters" for the = piano. Think of it! You turn up to tune a piano and merely have to = twiddle (or Noodle) the string adjuster on each string... The mind = boggles. (or is it Noodles?) <G> Regards from a gusty dark Sussex. Michael G (UK) ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/16/d9/78/69/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC