---------------------- multipart/mixed attachment >The flanges are available. I found them for half the price of Schaffs at >Pianotek. I work very slowly. I should probably charge by the hour >rather than by the job. Dangerous. One tends to not get faster, which makes it harder to avoid the lynchings for charging too much. >I took off every other hammer to avoid alignment problems. Probably >should use an electric screwdriver next time. I also did it in the home, >maybe I should take it to the shop. Looking forward to seeing the handout >from Tom Cole. > >Phil I did the last one on the floor of a teacher's studio with my regular old hand crank screwdriver. Half way through, my knees agreed with you about taking the action to the shop, but I was too far gone by then to get up and leave with it. I agree with John that power screwdrivers in aluminum rails are chancy. Ron N ---------------------- multipart/mixed attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC