Hi David, Use spider wire, you will not need to remove the thread out of the groove it is so thin. Super tough!!! Wrap arround a dowel and cut for pieces the same size then attach with thick CA. Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "David Love" <davidlovepianos@earthlink.net> To: "Pianotech" <pianotech@ptg.org> Sent: Thursday, February 05, 2004 3:17 PM Subject: Yamaha repair > I've got customer with a Yamaha console that needs all the thread that > holds the hammer return spring replaced (they're all breaking). I'm open > to suggestions about an expeditious way to go about this. > > David Love > davidlovepianos@earthlink.net > > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC