Sizing damper guide rail bushings

[Ron Nossaman]

>List,
>
>I have a newly rebushed damper guide rail. I ve inserted nails sized 
>slightly larger than the damper wires  into  the bushings while the glue 
>dries ( Glue applied only to the area on the underside of the rail where 
>the hole flares out)  I remember a recommendation to size the bushings 
>with alc.- water.
>
>             Good idea ?
>
>             Thanks in advance
>
>             Tom Driscoll RPT


Tom,
Three other guys pretending to be you just asked the same question. Very 
weird. Use #7 bridge pins for the cauls, and the alcohol shrink if 
necessary, and it'll be just right.

Ron N