Conrad Hoffsommer wrote: > At 21:11 4/9/2004 +0100, you wrote: > >> Hello List and RicB >> I've often come across keys which have been "knifed" open along side the >> bushings and the new slot thus made shimmed.... Also there is a >> special tool >> extant with a sort of inverted "W" on one side of the metal block. On >> the >> other side it is flat. The object is to place the key, ivory down, on a >> solid bench, insert the middle of this "W" in the bushed slot and >> then bash >> the other side of the block. Sounds a bit crude - don't even know >> whether it >> works or not - but it's available........ >> Michael G (UK) > > > > Ya sure, by golly, it works. > > ONCE! > > Then you either have to replace the button or rebuild the key because > you have just splintered the wood beyond redemption. > > > Conrad Hoffsommer > Decorah, IA > Thats about the...er... size of it ! RicB
This PTG archive page provided courtesy of Moy Piano Service, LLC