FW: Sizing damper guide rail bushings

[Paul Chick (Earthlink)]

At 09:11 AM 2/9/2004 -0600, you wrote:

>Subject: RE: FW: Sizing damper guide rail bushings
>
>I used this technique then switched to spraying a coat of shellac on the
>rails aiming it in the holes-the Bull's Eye Shellac in the spray can. Let
>dry for an hour, insert bushing cloth, insert #7 bridge pins, apply alcohol
>to bushing cloth, let dry overnight or blow dry with a hair dryer.
>
>Paul C

My favorite method also, Paul.
 What's a
"hair dryer?")

Guy Nichols

Sorry.  It should read a blow dryer for hair, or your heat gun at low temp
to prevent cooking the shellac...don't ask.

Paul C