Bridge repair

[Joe And Penny Goss]

Hi Daniel,
I would love yo try some of the cyanoepoxy ( not CA super glue but similar )
on this repair using a hypo and heat. Hoping that the heat would help the
glue to thin out and run into the cracks like the regular stuff does. If it
worked one might not have to take the strings off or let tension down.
Joe Goss
imatunr@srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "Daniel Schreffler" <invader@northlink.com>
To: "Pianotech" <pianotech@ptg.org>
Sent: Wednesday, February 11, 2004 9:16 AM
Subject: Re: Bridge repair


> Greetings,
>  Glue and a clamp seemed to work for the old masters. I would make sure
that
> you have some kind of wood on your clamps so the clamp does not damage the
> bridge while clamping. REally jam the glue in there so that it seeps out
> .Then that the clamp off clean the glue , then reclamp.
> Dan
> Northern Arizona University
> ----- Original Message -----
> From: "Ajay Mistry" <ajaymistryin@yahoo.co.in>
> To: <pianotech@ptg.org>
> Sent: Wednesday, February 11, 2004 7:43 AM
> Subject: Bridge repair
>
>
> > Hello list can anyone please suggest how to go along
> > with this bridge repair
> >                         Thanks in advance
> >
> >                                         Ajay Mistry.
> >
> > =====
> > Ajay Mistry
> >
> > ________________________________________________________________________
> > Yahoo! India Education Special: Study in the UK now.
> > Go to http://in.specials.yahoo.com/index1.html
>
>
> --------------------------------------------------------------------------
--
> ----
>
>
>
>
>
>
> --------------------------------------------------------------------------
--
> ----
>
>
> > _______________________________________________
> > pianotech list info: https://www.moypiano.com/resources/#archives
> >
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>