---------------------- multipart/alternative attachment In a message dated 2/15/04 10:19:59 AM, imatunr@srvinet.com writes: > > raise 1 or 88 and look for a screw going diagonallyinto the cheek block. > > The surface will be painted black so they are hard to see in a dimmly lit > room. > > Joe Goss > > I did look. It was rather dimly lit... But I did look and didn't see anything. In a message dated 2/15/04 10:32:50 AM, anrebe@zianet.com writes: > the cheek-blocks slid on and off of the bars securing the action. > > > I didn't try sliding them. Sliding forward? They seemed to be fastened > at the back end, behind the fallboard, which I couldn't see how to remove. > But if the whole thing slid forward, fallboard, cheekblocks and all...I didn't > try that. (But I'll try it next time!) > Thanks, Tom Sivak ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/69/9a/4a/f7/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC