Joe, Sounds kind of risky, this is a concert pianist/teacher who hears every little thing. Am I risking screwing up dampers that are doing just fine at the moment? Rick Ucci/Ucci Piano > Ucci said: "Can you suggest the proper procedure for eliminating the ringing > dampers?" > > Might I suggest a remedy that came from Yamaha. Many times, in shipping, if > the piano is on it's side for a long time, the damper guide rails will > shift, a bit, to the bass side. Try loosening all of the Guide rail screws. > Wedge to the treble and tighten the screws again. I've done this a few times > and it works, without getting the dampers all out of whack.<G> > Best Regards, > Joe Garrett, RPT, (Oregon) > Captain, Tool Police > Squares Are I > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC